Choosing a right Security CCTV Camera for your use | CCTV Training Oman
Which type of Security Camera should I use?
A security camera can come in many different styles including dome, bullet, infrared, and c-mount. The security camera that will work best for your application will depend on several factors such as whether you will use the security cameras inside or out, during the day, night time, or both.
Bullet style security cameras are the most popular.
Resolution levels for black and white security cameras are about 400 lines, any higher and the benefits are minimal. For color cameras, the higher the resolution the better.
Infrared security cameras are also very popular as they allow an image to be seen in little or no lighting conditions. Most infrared security cameras are bullet style and can be used inside or out. The cameras have infrared lighting installed around the outer edge of the lens which allows the security camera to see in no light.
The advantage to c-mount security cameras is that the lens can be changed. You’ll want a special camera lens if you need to see further than 35 ft. The color c-mount security camera allows you to change lenses on the camera giving you the ability to zoom into a particular area. Varifocal camera lenses allow you to adjust the focus from 5 to 50 mm. These lenses can be used inside only unless you put it in special housing for outdoor use.
Dome security cameras basically provide a different look. Everyone has seen these security cameras in businesses and stores. Because of its shape, it's difficult to tell exactly where the camera is aiming unless you see it up close. Dome cameras are generally used inside buildings
Dome
Cameras
The dome camera is obviously named for its dome shape. Everyone has seen these
security cameras in businesses and stores. Because of its shape, its difficult
to tell exactly where the camera is aiming unless you see it up close. Dome
cameras are generally used inside buildings, although the armor domes can be
used outside as well. You can
mount them on the ceiling or on a wall. They are available in black and white
(b/w) and color
Infra
Red Cameras
An infrared security camera has infrared LED lighting (light
from a different region of the electromagnetic spectrum than we normally use to
see) installed around the outside of the lens of the camera. This lighting
allows the camera to capture a good image in no light at all.
With a little bit of light (called low light) the infrared camera can capture a
picture that looks just like daytime. People use infrared security cameras for
businesses that have the lights out at night (in case of break-ins). Or for
outside, night time viewing. Keep in mind that even at nightime there is a
normally some light from the moon, stars, or street lights.
Infrared cameras are often called “Night Vision” cameras because they can ‘see’
at night. However, do not confuse “Night Vision” with “Day / Night Cameras”.
Day / Night cameras do not have infrared lights built-in.
Infrared security cameras will provide a color picture while the light is good. When it gets dark, the camera will switch to infrared mode and illuminate its built-in infrared LEDs. In infrared mode the image is captured in black and white - this is true of all infrared cameras. The level of light required to capture a good picture is referred to as a camera’s lux, the lower the lux the better the camera can see in low light. For example, a camera with 0.003 lux is better than a camera with 0.2 lux. Infrared cameras are considered to be 0.0 lux in infrared mode - in other words, they can ‘see’ with no light at all.
If you are going to use an infrared camera outdoors, it's best to use an outdoor
weatherproof bullet-style camera. This is because if you use an indoor infrared
camera and need to put it in an outdoor housing, sometimes the infrared light
reflects off the glass of the housing. Some people get acceptable results if
the camera is absolutely flush up to the glass thereby reducing the glare. An
alternative solution is to use a day/night camera which has an extra
sensitive imaging chip that allows it to capture a good picture in low light
situations without using infrared lighting. This works well for example if
there are street lights outside or an exterior light that can be left on at
night. Keep in mind that cameras without infrared lighting will not capture an
image with zero light. The other issue to consider is that infrared cameras
require more power (more amperage). The power requirements are provided in the specs
for each camera.
Bullet
Cameras
The term Bullet Camera comes from its resemblance to a rifle bullet. Generally
long and tapered like a cylinder, it looks like an oversized ammo cartridge.
Most bullet cameras come with a fixed 3.6mm lens that allows an 80-degree angle
of view. This is the widest angle you can have without distorting the picture.
A 4mm lens will allow you to see facial features out to about 35 feet. If
infrared is included you can generally see 35 feet minimum with no external
lighting, some can see up to 70 feet.
Some devices capture images in color which is best for daytime lighting. For
nighttime viewing choosing an infrared camera, which captures images in black
and white is better. Many of the products will display color during the day and
automatically switch to black and white infrared viewing when light levels are
low. Resolution levels for black and white are usually about 400 lines, any
higher resolution and the benefits are minimal. For color, the higher
resolution the better the picture.
Used in closed-circuit television applications, bullet cameras contain
essentially the same electronic components as c-mount cameras but have been
modified to fit in a weatherproof casing for outdoor use. You can see from the image that some
models allow the housing to be removed for installation indoors. Mounting
brackets are included with each item. They can be installed on the ceiling or
the wall. The voltage is 12V DC. Power adaptors are included with every
camera.
C-Mount Cameras
The advantage of a c-mount camera is that the lens can be changed. If
you need to see further than 35 or 40 ft then you’ll need a c-mount camera with
a special lens. C-Mount lenses are available from 4mm to 50mm. A 4mm lens
provides facial detail and a 70-degree angle of view focused up to about 35 ft.
An example of where you might use a fixed 4mm lens is in a small office, or at
home to focus on your driveway.
A higher millimeter lens will provide further distance, but narrows the field
of view. So, a 16mm lens would provide about a 15 to 20-degree angle of view at
a focus distance of about 35 ft (or a 70-degree angle of view at about 140
feet). In general, a 8mm lens is like a 4mm lens zoomed in 2 times. Similarly,
a 16mm lens is like the 4mm lens zoomed in 4 times.
Many times, the best option is to use a varifocal lens. This will allow you to
vary the focus from 5 to 50mm. So when you install the camera you can fine tune
the focal distance and angle of view. An example of where you might use a
varifocal lens is outside (or inside) a large commercial building where you
need more distance than 35 ft. and the varifocal lens will allow you to adjust
the focal distance to your preference.
Post a Comment